Ceramic wood tile – When the operation appears to be blurred during installation, it is often smeared on the surface of the plate. The plates are then dried clean, but a fog will remain. This cloud of haze on tiles can be removed with proper cleaning. Your ceramic tile surface will light in no time
Fill a bucket of clean, warm water. Dip a sponge into the water, twist out properly and scrub the ceramic wood tile. Rinse and twist out of the fungus frequently to avoid spreading the throat. Wipe the plate dry with a clean towel. Mix equal parts of vinegar and water in a bucket. Moisten the sponge with the solution and scrub the tiles. Use some power to remove the turbid dirt from the tile. Be sure to clean the joints too, as this is what actually causes turbidity.
Wait 24 hours and repeat the cleaning. Wash the ceramic wood tile with water is sure to rinse the sponge between the plates. Use a clean dry cloth to cross each individual plate. Shake the cloth in a sack bag between wiping each box to remove all trash stuck on the cloth. Use a commercial remover grout tooth if grumbling is still on tile. You can buy such cleaning products at most builders’ houses or from tiles manufacturers. Read the label to be sure the product is safe to use on ceramics. Follow the instructions on the packaging for use of the product.